the heat flux controller? is a high heat fux chip simulator capable of measuring and controlling the amount of heat in a resistive element. the HFC-100? comes with a chip simulator capable of dissipating 1k/cm 2 . the design of the heater block insures minimal heat loss to the ambient, hence, a more accurate thermal resistance determination of either heat sinks or cold plates. this system features ats proprietary fuxstage?, a labview? application, which automates the use of the system and allows the user to choose multiple heat loads at a specifc dwell time. the program calculates the thermal resistance of the cold plate for desired cooling of the die and measures the simulated junctions temperature. for further technical information, please contact advanced thermal solutions, inc. at 1-781-769-2800 or www.qats.com 89-27 access road, norwood, ma 02062 usa | t: 781.769. 2800 f: 781.769.9979 | www.qats.com r4_0215 temperature & velocity measurement features: ? automated calculation automatically calculates the total thermal resistance of heat sink, cold plate or cooling device ? high heat flux chip simulator simulated chip is capable of dissipating 1 kw of over 1 cm 2 ? versatile measurement capable of transient steady state and transient measurements ? up to 8 sensors can accommodate up to eight thermocouple sensors for precise temperature measurement ? dynamic control features dynamic control of the simulated chips power dissipation ? dynamic measurement dynamically measures the resistance of the heating element for accurate dissipation calculation ? fluxstage tm software features ats fluxstage ? application which automates the use of the system and allows the user to choose multiple heat loads at a specific dwell time ? automatic shut-off automatically shuts if the heater temperature rises above the user defined protocol ? free lifetime tech support HFC-100 tm heat flux controller overall dimensions (l x w x h) 55.9 cm x 42.5 cm x 8.8 cm (22 x 16.7 x 3.5) accuracy +/- 1% number of sensor ports 8 output power up to 1 kw output voltage up to 40 vdc input power 115 vac pc connection usb software fux stage tm weight 10 kg (20 lbs.) illustration of the HFC-100 heat flux controller with simulated chip capable of dissipating 1 kw of heat over 1 cm 2
|
